The Phase Controller provides switching, dimming, energy monitoring, and more in one versatile device. Phase Controllers can replace an existing dimmer, be flush mounted to a ceiling, or be installed in the plenum.
120VAC up to 450W
White: LCDIMMER/PD/W/BLANK | Get Spec Sheet
Lightcloud Gateway required.
Replace an Existing Dimmer
Flush-Mount on Ceiling
In-Ceiling Control
Call 1.844.LIGHTCLOUD
No Control Wires
Just Add Power
Indoor Range: 100′
Outdoor Range: 1000′
Send, Receive, and Repeat Commands
Extend the Range of the Lightcloud Mesh
450W LED
450W Incandescent (reverse phase-control)
450W Magnetic Low Voltage (symmetric forward phase-control)
450W Electronic low voltage (reverse phase-control)
200W Dimmable CFL
Forward or Reverse Phase Dimming (MLV/ELV)
Metered Energy Monitoring
Historical Backup in Cloud
Remotely Pair with Sensor or Sensor Group
Unlimited Time Clock Functionality
Fault Detection
Device Offline Notifications
Power-Up State
Signal Loss Mode
Fully Encrypted
Proprietary Communication Protocols
RAB No Compromise
Full Hardware Coverage
Outlet 