lightcloud gateway controller occupancy touch

 Dimmer

The Lightcloud Dimmer is an in-wall device that delivers remote switching, dimming and scene control. Need a shortcut button to trigger a particular scene? Or a toggle between multiple scenes? Having Lightcloud means no programming and ridiculously easy commissioning.

Features
More than meets the eye.

Use Zone Mode for switching any remote circuit on your Lightcloud Network. If your application calls for it, enable 0-10V dimming. Alternatively, choose Scene Mode and use the switch as a toggle. Or use a custom setup to give you any combination of zone and scene control.
Stay connected.

Thoughtfully placed LEDs show the current dim level and confirm that the Dimmer has a strong connection to neighboring Lightcloud devices. A discrete nightlight activates whenever the zone is switched off.

Extend your reach.

This is the dimmer that works overtime. No matter how you set it up, the Dimmer will extend the range of any Lightcloud network by at least 100 feet in normal indoor construction. Use it to boost the mesh network in open spaces, or to steer the RF signal around any thick concrete or brick walls.

Tech Specs
Input Voltage 120-277 VAC, 50/60 Hz
Dimensions 1.77" (45.0 mm) width
2.70" (68.6 mm) height
1.49" (37.8 mm) depth
Current Draw 14 mA @ 120VAC
10 mA @ 277VAC
Unit Weight 0.25 lb (0.11 kg)
Wireless Range Line of Sight: 1000 feet
Obstructions: 100 feet
Warranty 10-year full hardware warranty with 100% repair/replacement coverage for all properly installed devices.
Operating Temperature Range 0°C to 40°C

Need help with this product? Call us at 1(844) LIGHTCLOUD

Download The Manual Call RAB

More Products
Gateway IoT control wireless system

Gateway

120-277 VAC, 50/60Hz

The Gateway is the brain of a Lightcloud™ system. It communicates with RAB’s servers via a private 3G cellular connection, so no internet access is required. Plus, it features an Uninterruptible Power Supply for added peace of mind.

View Product
Controller lightcloud lighting control fixture

Controller

120-277 VAC, 50/60Hz

The Controller is the basic building block of the Lightcloud™ system. Use it for switching and 0-10V dimming. Deploy it for power management. Or simply use it to extend the range of your Lightcloud mesh network.

View Product
Ceiling Sensor lightcloud solution lighting

Sensor

120-277 VAC, 50/60Hz

This compact occupancy/vacancy sensor packs a punch. The Lightcloud Sensor is a Passive Infrared motion detector that can switch and dim both local and remote circuits, plus monitor power usage and send an alert if power is lost.

View Product
Daylight lighting control wirelss solution

Daylight

Solar Powered

Stop overlighting and start cutting your utility bill with the Lightcloud Daylight. This solar-powered wireless sensor can dim or shut off electric lighting when sunlight is sufficient to achieve your desired lighting level. The end result? An incredible 38% average reduction in energy savings for office buildings.

View Product
Touch control IoT wireless solution

Touch

120-277 VAC, 50/60Hz

The Touch is an elegant wall-mounted touchscreen that gives you convenient switching, dimming and scene control for all of your zones. This display measures a full 10” and requires no internet access, communicating directly with other Lightcloud™ devices via a local mesh network.

View Product